National Aeronca Association Bulletin Board

thanks for jumping in.

thanks for jumping in.

I have constructed a 4" tube with a remote controlled linear actuator that opens and closes a door on the end of the tube and will be mounting it out on my lift struts away from my tailfeathers so that I can load into the tube the creamated remains of several family members and disperse over th...

Hi
I'm looking for a few feet of both front and rear wing lift strut material from a Chanp. Anyone got some old bad struts that I can buy a few feet of each?

Thanks

Del

I like the Meyers plow on the front..........LOL
Happy flying to all in 2016

Del

I hope you all have a wonderful Thanksgiving.

Del

Dave Keep in mind if you ever have to replace a rear window you have to deal with how well you cemented it in. On mine I drilled slightly larger holes in the window so that the attachment screws had plenty of clearance, then just spot silicon here and there around the window. Another spot to look at...

Dave Keep in mind if you ever have to replace a rear window you have to deal with how well you cemented it in. On mine I drilled slightly larger holes in the window so that the attachment screws had plenty of clearance, then just spot silicon here and there around the window. Another spot to look at...

Dave I do not think it is normal to place finishing tape on the inside curve of the rear window of a champ. I believe the fabric is glued to the wood window frame with no tape. It is really a place that you can give some thought to as to how to get it right. Thus it becomes important to properly pre...

What does IRAN mean?

Way to go Paul....... You need another airplane. What shape is it in? Photo please.......

Im just putting the finishing touches on my 7BCM here in Columbia and looking forward to flyin it.

Del

Does anyone know where to get the crankshaft oil plug that is installed in the prop end of a tapered crankshaft on a Continental C-85? help

Del

What is the correct installation procedure for the crank end plug on a continental taper crank? It is the 1 3/16 plug in the prop end of a tapered crank?

Del

Hi to all

Looking for a prop for my Aeronca Champ 7BCM
85 hp continental
tapered shaft crank
1a90 71/43 would be perfect
End of 4 year restoration.........want to start it finally
Let me know what you have

Thanks

Del
Columbia Ca. O22

Hi to all

Looking for a prop for my Aeronca Champ 7BCM
85 hp continental
tapered shaft crank
1a90 71/43 would be perfect
End of 4 year restoration.........want to start it finally
Let me know what you have

Thanks

Del
Columbia Ca. O22