National Aeronca Association Bulletin Board

The exhaust system that I have came off an 7DC with an cont. 85-8 . Would anyone know if this would fix any other cont. engine with or without a starter. I think that there are some parts that will fit a 65 to an 0-200. Someone asked if this would fit an 0-200 cont. and I don't know for sure, would ...

I have a halon wilson exhaust system in good shape that came off an (85-8)7 DC aeronca that was crushed in a hanger collapse I am looking to sell. Can send some pic's if interested, or try to answer any question you might have. $400.00 or B.O. plus shipping Steve [ system has been sold]

Sold

For sale a complete Halon Wilson exhaust system that I just removed from an Aeronca 7 DC 85-8 cont.Thought Iwould list it here first, all parts look to be in good shape , the elbows for the scat tubing off the muffler shrouds are not the best, but all other parts look good. Can send some pic's and w...

I have a hanlon Wilson exhaust system that was on 7dc that I am going to sell seems the exhaust will not fit to well in a PA 11 cowling. Would like to asked what some of the things to look for that might be a problem with the exhaust ( have not removed it as of yet) Would like to give anyone interes...

Have a few parts that I think go to an aeronca but not dead sure ,a fuel gauge , a fuel valve and handle for a chief, a brass tail wheel post with a tag on the post that says aeronca model # 3000. a main tail spring that I think might go to an aeronca, A7 mag switches, A9 mag switches If anyone is i...

Thanks for the posts ,not finding any info on the net has me buffaloed. They look like a pr that was just taken off an aircraft, painted black with shielded cables, Would shielded cable have been used on a gen. It is a mystery, again thanks for the thoughts Steve

Thanks 'll give them a try Steve

Looking for some info on some slick mag's that I have. The model# is 46-1 they are for a four cylinder ,had shielded ignition on them and where with some plane parts that i bought so I was thinking they must be aircraft related but info on the net about this model is harder to find then hen's teeth ...

This is a question about some slick mags that I have, Not finding any info on the net has my curosity up. the model # is 46-1 they have a set of shielded cables so I am thinking they might have been on a aircraft, Done a web search on the model # but there is very little info on this model #. Would ...

I have a few parts that I am looking to sell, a scott 3200 tail wheel post [brass top post] with a small tag that say Aeronca scott 3200 ,looks new, a few fuel guages, fuel shut off and handle for a chief, new tail spring , a7 /a9 mag sw, cream faced tach ccw with right angle drive , a new set of sn...

Complete set of certified ceconite 101 covering envelopes for Aeronca 7DC for sale. Date stamped mid 90's, called factory, age not a problem. Still in orginal shipping box and plastic wrapping $475.00 or B.O. plus shipping stephen1942@myfairpoint.net] SOLD

Hi thank for the reply. The valve is maybe 1/4 p.t. female to male tank end with finger strainer hard to tell if tank side is a nipple or male end .One of the gauges has a metal float with a sight glass about the size of a quarter, the gear teeth for the gauges are real fine, I thnk I might have see...

Going thru some parts that I have,I came across a fuel valve and 2 fuel gauges. The handle is marked imperial w/tag for chief rear tank shut off There is a brass valve that has a finger strainer that looks like it might go in a tank that was with the handle, Two fuel gauges that have a float with a ...

don't know what you need for a mag. switch I have a A7 mag switch and a set of sewn wing covers for a 7DC[ ceconite 101 still in wraping appor.10/15 years old]. If these are of any interest to you make me a fair offer plus shipping Steve