Rubber seals at wing gap

mtw · Post by **mtw** » Mon May 12, 2008 20:09

I am looking for the rubber seal that goes on the edge of the wing gap seal at the leading edge of the wing. This is the piece that ties into the windshield. I checked the suppliers but no one listed anything specific to Aeronca. I wanted to see what some of you may have had luck using.

Thanks,

Todd

Mikek · Post by **Mikek** » Mon May 12, 2008 22:00

mtw wrote:I am looking for the rubber seal that goes on the edge of the wing gap seal at the leading edge of the wing. This is the piece that ties into the windshield. I checked the suppliers but no one listed anything specific to Aeronca. I wanted to see what some of you may have had luck using.

Thanks,

Todd

Would have to look again to see what it looks like but Wag-Aero has several styles of wing root and others listed in the Catalog.

n1269k · Post by **n1269k** » Tue May 13, 2008 07:42

I used the Wicks part number RC-4. Worked great for me.
Terry

Paul Agaliotis · Post by **Paul Agaliotis** » Tue May 13, 2008 08:04

Todd.
I get mine from Univair. It's listed as an Ercoupe windshield seal. Quite a bit heaver than the "h" rubber listed in the bulk products.
Paul

mtw · Post by **mtw** » Tue May 13, 2008 11:35

Hey guys I really appreciate the info! Very helpful.

Thanks again,

Todd

Larry Prater · Post by **Larry Prater** » Mon May 19, 2008 20:26

we just replaced the windsheild in our 39 50-C and the glass company had some that is all most a perfect match to what are's is but not sure
if yours is the same

mtw · Post by **mtw** » Tue May 20, 2008 10:59

Thanks for the help.

Todd

National Aeronca Association Bulletin Board

Rubber seals at wing gap

Rubber seals at wing gap

Re: Rubber seals at wing gap

Rubber trim at wing gap seals

rubber seal

Rubber trim at wing gap seals