Inclinometers

General discussion and guidelines
Post Reply
jkvincent
Posts: 476
Joined: Wed Jun 21, 2006 22:34
Location: Houston, Tx
Contact:

Inclinometers

Post by jkvincent »

...or "Ball", Slip indicator, or what-ever you call it....what's the deal with them?
Every Aeronca has one, did they come from the factory with one?
I've looked at most suppliers and have found that none are FAA/PMA'd.
Is that not necessary ???
MikeB
Posts: 3246
Joined: Wed Nov 17, 2004 17:07
Location: Western Wisconsin
Contact:

Post by MikeB »

Personal opinion: I wouldn't worry about it. I'm not sure any of the instruments, etc. were 'certified' when the Champs and Chiefs were built.

Mike Berg
"If God had intended man to fly He would have given us more money"
WWhunter
Posts: 599
Joined: Sun Jul 31, 2005 08:34
Location: God's Country-The boonies of Northern MN
Contact:

Post by WWhunter »

I bought one from someone on ebay for $10 since my plane never had one either and the instructor I had for tail wheel suggested I get one.
User avatar
Mikek
Posts: 594
Joined: Sat Nov 13, 2004 21:13
Location: Yellow Springs, Ohio 45387 [3OH0]
Contact:

Post by Mikek »

WWhunter wrote:I bought one from someone on ebay for $10 since my plane never had one either and the instructor I had for tail wheel suggested I get one.
Well did it help the Instructor??
Mike Knemeyer

1410 Meadow Lane
Yellow Springs,Ohio 45387

3oh0
N83348 7AC-2015
N82146 7AC-772
WWhunter
Posts: 599
Joined: Sun Jul 31, 2005 08:34
Location: God's Country-The boonies of Northern MN
Contact:

Post by WWhunter »

It must have...he signed me off. :)
User avatar
james gevay
Posts: 380
Joined: Fri Mar 09, 2007 18:39
Location: Anoka County MN
Contact:

Post by james gevay »

I don't think they were installed at the factory, but were added by many owners later.

Here's a picture of 3 styles of Slip Skid indicators I have.
The top is the one that was installed on my Champ when I bought it. Its the big 6" one from Wag Aero. The bottom 2 were found on E-bay and both rebuilt by me. I used dental picks and a magnifying light to scrape out the old material and remove the glass tube and then clean and paint the housing. I then used white caulk to set the glass tube back in and painted the markings on the front. I only painted the marks and not the numbers as I don't think they are necessary and it was much too difficult.

The top 2 weigh the same, both are 3oz. and the small miniature Rieker is 1oz.

I like the middle one because it looks older, like it fits the style of the plane better.
Image
MikeB
Posts: 3246
Joined: Wed Nov 17, 2004 17:07
Location: Western Wisconsin
Contact:

Post by MikeB »

While I don't necessarily agree with it I think it was Bill Piper who said "I don't care where the ball is as long as it's in the airplane" in regard to flying a J-3.

Mike Berg
"If God had intended man to fly He would have given us more money"
lundq
Posts: 43
Joined: Wed Mar 14, 2007 12:40
Location: Kindred, North Dakota
Contact:

Post by lundq »

Anyone here mounted one so the guy in the back seat can see it? If you're flying/instructing with a tall drink of water in the front seat, it's hard to see it from the back.
flyingfool
Posts: 302
Joined: Fri Aug 15, 2008 15:03
Location: Madison, Wisconsin
Contact:

Post by flyingfool »

lundq wrote:Anyone here mounted one so the guy in the back seat can see it?
Chiefs don't have that problem! Another good reason chiefs are "better"! LOL

I just couldn't help myself....the door was wide open!
User avatar
joea
Site Admin
Posts: 5993
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Post by joea »

Was going to say that but the morning coffee is just starting to work.

Sedans do not have that problem either! :)

Joe A
jkvincent
Posts: 476
Joined: Wed Jun 21, 2006 22:34
Location: Houston, Tx
Contact:

Post by jkvincent »

James, ...thanks for staying on subject and posting a photo, Great!

But you "Chief guys" :twisted: are always quick to jump in.
You know, ....something I noticed is...they're still building tandem seat (as in, Champ) airplanes....strange!! :wink:

Jim
DC Krog
Posts: 81
Joined: Fri Feb 10, 2006 09:10
Contact:

Post by DC Krog »

If you check out some old photos and cockpit layouts of 7AC's they indeed come from the factory with a small "slip & skid" indicator located in the center of the instrument panel just about the cross member support tube. This gage was only 3 or 4 inches in width and was useless to the instructor in the rear to see.

Personally I like the sightly larger 7 inch indicator for a more accurate reading, but the true "seat in the pants" feel is the real indicator.

DC Krog
User avatar
Jody Wittmeyer
Posts: 591
Joined: Wed Nov 17, 2004 13:47
Location: Kewanee, IL. (EZI)
Contact:

Post by Jody Wittmeyer »

Kudo's DC. You shouldn't ever need a slip indicator. You can feel things in your butt much quicker than the gauge. Need more ways to keep pilots looking out the window, instead of keeping their eyes inside. It is so easy to fly a champ with no instruments at all.
Let it fly off the ground when it's ready to fly. Climb out at 3 point attitude gets you 55-60. Wings level at cruise. Feel pressure/weight on left butt cheek, left pedal until it centers the weight on both. Pressure/wieght on right butt cheek, right pedal until it centers the weight on your bottom. Throttle off glide- wings level or leading edge slightly lower than trailing. Feel the airplane. Look outside to see who's going to hit you!
Rear seat pilot feels things way before the front seat person does, especially in a slip or skid
Blue Skies and Stay Safe, and preserve 'em
Post Reply