Brake Cables

Terry B. · Post by **Terry B.** » Wed Apr 15, 2009 23:51

I purchased (ouch) new brake cables from AS and S and was wondering if anyone has a photograph of how they should be mounted. Mainly looking for which sides of the tubing they should be routed. It looks like either way I run them, they make some contact or are close to the front to rear pedal conection rods. If anyone has a photo or link to photos, could you let me know? My email is tbledsoe@austin.rr.com . Ideally a photo taken from the front looking back between the floorboards and the covering would be great.

Thanks

Terry

(one of the last items I need to do before slipping the envelope on)

Post by **joea** » Thu Apr 16, 2009 01:13

Terry,

Which airplane is this on? Chief or Champ or ???

Terry B. · Post by **Terry B.** » Thu Apr 16, 2009 12:26

My bad, should have posted under my main thread but hit new topic instead of reply.

1946 & AC Champ

Thanks

Terry

( I started a master post under restoration about half way down and did this post while half asleep last night)

DELCOM · Post by **DELCOM** » Thu Apr 16, 2009 14:47

Here is what I did to my 7AC. Look in the airframe section to see my photos.

http://s27.photobucket.com/albums/c177/DELCOM/AIRFRAME/