11AC Doors

Paul Agaliotis · Post by **Paul Agaliotis** » Sun Apr 19, 2009 17:45

I'm in the market for some Chief doors. The doors I have need a bunch of work. If someone has a set let me know.
Paul

Post by **joea** » Tue Apr 21, 2009 18:32

Paul,

I have some Chief doors but they are as well not in the best of shape.

What are you looking for? Rebuilders or good condition?

Joe

Paul Agaliotis · Post by **Paul Agaliotis** » Tue Apr 21, 2009 21:35

Joe,
My doors have some damage to the stamped inside panel. The outer skin I can replace and spot weld it back on. If I can't find any replacement doors I am going to have to make some forming blocks to make the repair parts. It's like two jobs, after the parts are made I still need to do a flush repair on the inner skin.
If I don't find any I'll have the tooling to make repair parts for the Chief doors. I guess that's a good thing.
Paul

s2d · Post by **s2d** » Tue Apr 28, 2009 22:01

Paul

I have a couple someone gave me. They are sitting in my salvage heap. I'll take a look at them and see if the inside panels are ok. You can have them for the shipping if they are salvageable.

Brian

Paul Agaliotis · Post by **Paul Agaliotis** » Tue Apr 28, 2009 22:21

Thanks Brian,
Any parts will help. The doors I have are corroded and if I can't find replacement parts I'll have to make them. If any of the stamping is usable it will work.
Paul

s2d · Post by **s2d** » Tue Apr 28, 2009 22:42

PM me your email, and if I remember, Ill dig them out tomorrrow and take a few pics and send you.
Brian