Block-off plates for sale

[Nathan K. Hammond]

I was looking for a set of block off plates when I talked to my neighbor about it. His son had just moved in and has a 3-axis CNC maching as well as the programs to cut the covers! So check out his handy work.

Clint Comeaux (pronounced "Como")
770-412-6403

nkh

[joea]

Very nice work! Is he interested in doing other work on the side? I have a lathe but no access to a CNC mill and thats handy.

Joe A

[Nathan K. Hammond]

He's kind of floatting right now, just moved to town about 2 weeks ago so don't know what his intentions are. His father runs a cabinet shop out of a hangar and Clints been helping him out. But I think he's wanting to do this sort of thing for a living, (and work for himself.) He worked for Sky-Tec (light weight starters) for a while, but wanted to be close to family, hence the move.

So if you need anything CNC'd he can do it.

nkh

[Joepre]

Do you happen to know what price he is asking for the plates?

[Nathan K. Hammond]

I don't know if he's set a price yet, but these are ball-park numbers.

These are subject to change and have not been verified.

Starter (large plate) - $80
Generator - $40
Vacuum - $40

nkh

Will try to verify prices this weekend.

[Joepre]

OK, How do I go about getting one. Should I call him directly or should I go through you?

[Ron Babos]

Nathan: Good thing my 65 doesn't have any of these, or I'd have to spend more money
Ron

[Nathan K. Hammond]

Try to go through him first. Middle men are a hassle. The number listed (770-412-6403) is his fathers shop. Just ask for Clint, or leave your name, number and a brief message at the beep.....you know the drill. If you have problems, pm or email me.

Ron, if you don't spend it... she will.

nkh

[Nathan K. Hammond]

Got some better info on these plates.

Starter (large plate) - $85
Generator - $45
Vacuum - $45 [

Here's a better method for contacting Clint

cncmachine@comcast.net

nkh

[max7ccm]

I WOULD BE INTERESTED IN THE SET. QUESTION ARE THE 4 HOLES IN

THE VACUME PUMP PLATE THE SAME SIZE? 3 SHOULD BE 1/4'' & 1 5/16''

DIA. MAX

[Nathan K. Hammond]

When we made them, all holes were 5/16 for simplicity. So far I've not had any problems or leaks on my set. You might be able to have Clint make one hole 1/4 inch.

Ask for Clint in the machine shop...
770.467.9490


nkh