side window installation

A section to provide help and assistance to anyone restoring their airplane.
Post Reply
PB Schafer
Posts: 36
Joined: Tue Apr 13, 2010 23:46
Contact:

side window installation

Post by PB Schafer »

What is the best method to use when installing the rear side windows in a Champ?
My old ones were kind of a mixed bag. I have new frames, cover and headliner, and don't want to have to deal with leaks. I have seen some done with foam tape, and some with putty tape.
Thanks for your help.
PB Schafer
" Those who say it cannot be done, should not bother the one doing it "
User avatar
RRHaldeman
Posts: 241
Joined: Sat Nov 28, 2009 11:07
Location: Mt Juliet, TN
Contact:

Re: side window installation

Post by RRHaldeman »

When I return to C77 in mid-May, I will be faced with the same task. Installing side windows in a refurbished Champ. I was planning to use a type of clear silicone caulk and then screwing the metal fairings over the window. It worked for me what I resealed by Skylane side and rear windows ten years ago, so I think it should work on my Champ. OTOH, if anyone has actual experience and a better idea, let's hear from you.
Dick Haldeman, RRHaldeman AT aol DOT com
Cell (815) 222-9812
1946 7AC-2407 N83729
Champ Dreamer
Posts: 185
Joined: Thu Mar 20, 2008 00:14
Location: Colorado Springs
Contact:

Re: side window installation

Post by Champ Dreamer »

Made and installed new windows recently. Set them in clear silicone for plexiglass (from Home Depot). Held in place with the metal frames. Do not drill thru plexiglass, the frames hold it in place just fine. Of course, I haven't flown mine yet, they might blow out on the first flight.

Brian Walker
N1197C '46 7AC/DC
MikeB
Posts: 3246
Joined: Wed Nov 17, 2004 17:07
Location: Western Wisconsin
Contact:

Re: side window installation

Post by MikeB »

I basically did the same on my Champ and no problems after 10 years.

MikeB
Post Reply