Drawings for 65 TC exhaust

Jerry Jackson · Post by **Jerry Jackson** » Mon Jun 22, 2009 09:18

I need drawings showing details for the exhaust stack on a 65 TC. I think the information will be on drawings 7-88, 4-158, and 4-159. Can anyone help?

Post by **joea** » Mon Jun 22, 2009 16:41

Jerry,

Am out on the road flying right now and not much time.

Will check latest once I get home tomorrow.

Joe A

Jerry Jackson · Post by **Jerry Jackson** » Mon Aug 01, 2011 08:20

Joe, were you able to find any information on this? If I can get the information I will look into having one made. If not I guess I will have to settle for Y-style pipes.

Jerry

Post by **joea** » Sun Oct 16, 2011 10:53

Jerry,

Do you still need these?

Sorry have been swamped with work and off of the forum for a while...

Joe

Jerry Jackson · Post by **Jerry Jackson** » Mon Oct 17, 2011 09:51

Joe

Yes, I would like to have those drawings. I am in the final stages of fitting a new cowling to my TC65 and have to decide on the exhaust system. That fuselage is very narrow and I am searching for info & advice that would let me make an appropriate choice.

Thanks.

MikeB · Post by **MikeB** » Mon Oct 17, 2011 12:36

Jerry,
I'll have to swing around and check out your TC65 one of these days. We just bought a 'winter home' in San Antonio (to stay warm and closer to the grandkids

). Although I don't expect we'll be down until after the first of the year. If I remember correctly the last time I looked your TC was still a pile of parts so you must be making good progress on it.

Mike Berg

Jerry Jackson · Post by **Jerry Jackson** » Tue Oct 18, 2011 11:52

Mike

You are welcome to any time. Did I send you the gate code and my telephone number?

I have made progress but not as much as I would like. I have repaired some fuselage tubing, blasted & primed fuselage, made motor mount and firewall. This week I striped the wing covering so I could inspect the (unobtainable) aluminum truss ribs. I am happy to report the ribs and other structural parts are OK. I will have to replace LE sheet, trailing edges, and tip bow. I won't know about the spars until I disassemble them.

I have spent a LOT of time learning how to shape aluminum for a new cowl. That is one of the hardest subject I have ever tried to learn. I have finished the four major pieces but cannot go much further until I am ready to commit on the choice for the exhaust system and know what cutouts to install.

Jerry Jackson
7ECA & TC65
8T8, Lot # 8

MikeB · Post by **MikeB** » Tue Oct 18, 2011 22:25

Jerry,
Think I have the numbers somewhere. If not I'll get back to you once I'm down there.
Mike

National Aeronca Association Bulletin Board

Drawings for 65 TC exhaust

Drawings for 65 TC exhaust

Re: Drawings for 65 TC exhaust

Re: Drawings for 65 TC exhaust

Re: Drawings for 65 TC exhaust

Re: Drawings for 65 TC exhaust

Re: Drawings for 65 TC exhaust

Re: Drawings for 65 TC exhaust