Champ rudder cable exit dimensions

Post-War Aeronca Champ airplanes
Post Reply
Jim McCartney
Posts: 85
Joined: Wed Nov 17, 2004 08:32
Location: Lake Tapps, Washington
Contact:

Champ rudder cable exit dimensions

Post by Jim McCartney »

I am ready to connect the rudder cables to the rudder and can`t find the exit dimensions on the fuselage. Does anyone have these? Thanx, Jim
MikeB
Posts: 3246
Joined: Wed Nov 17, 2004 17:07
Location: Western Wisconsin
Contact:

Re: Champ rudder cable exit dimensions

Post by MikeB »

Hi Jim,
Just measured the ones on my Champ and the cut is 32 inches ahead from the tail post (aft side) and 6 1/4 inches up from the lower longeron.
Hope this helps!
Mike Berg
Jim McCartney
Posts: 85
Joined: Wed Nov 17, 2004 08:32
Location: Lake Tapps, Washington
Contact:

Re: Champ rudder cable exit dimensions

Post by Jim McCartney »

Hello Mike, That is exactly what I was looking for. Thank you, very much. Jim
Post Reply