Would anyone have the installation instructions for the Hartzell HA-12UF-1 propeller. This is the ground adjustable prop with the micarta blades, for the flanged shaft.
Paul
Hartzell Props
-
Paul Agaliotis
- Posts: 2589
- Joined: Wed Dec 08, 2004 18:49
- Location: San Martin, California
- Contact:
Hartzell Props
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046
Re: Hartzell Props
Paul, is this something Hartzell might have. A friend, Cody Stallings, who owns a prop shop said he would call them, if you wanted.
Dennis
Dennis
-
Paul Agaliotis
- Posts: 2589
- Joined: Wed Dec 08, 2004 18:49
- Location: San Martin, California
- Contact:
Re: Hartzell Props
Dennis,
I have an email into them but no response yet. It's an older prop but still has an active Type Certificate. They should have some information on the prop so maintenance can properly install and service the prop.
My prop is for the flanged shaft and I'm looking for the attachment hardware, hoping Hartzell can supply something. It's a ground adjustable with "Hartzite" composite blades. I want to run it to see how it will work.
Paul
I have an email into them but no response yet. It's an older prop but still has an active Type Certificate. They should have some information on the prop so maintenance can properly install and service the prop.
My prop is for the flanged shaft and I'm looking for the attachment hardware, hoping Hartzell can supply something. It's a ground adjustable with "Hartzite" composite blades. I want to run it to see how it will work.
Paul
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046