)-200 install in Chief

CW · Post by CW » Thu Dec 30, 2004 19:11

I'm interested in installing an 0-200 in my 11BC. Has anyone done this? Are there any large structural changes required on the airframe? If some one can give me any feed back on the pro's or con,s and any info on the availability of STC's, that would be great.

Don Eide · Post by **Don Eide** » Fri Dec 31, 2004 07:22

An STC for the 0-200 in Aeronca Chiefs is avalable from
Buzz Wagner
Box 3, 401 1st St. East
Clark, SD 57225
Phone (605) 532-3862
Fax (605) 532-1305
Hope this helps.

john greaney · Post by **john greaney** » Fri Dec 31, 2004 11:23

Does anyone have experience in getting the Wagner STC approved?
I bought the STC several years ago for my 0-200 powered champ, but haven't made the necessary changes and gotten approval yet. I still need to change the wing spars to conform to the AD and plan to do both at the same time.

Don Eide · Post by **Don Eide** » Sat Jan 01, 2005 08:31

John,
When you bought the STC you bought the approval.
Do what the STC says and your mechanic can sign it.
The STC means the FAA has already signed it off.
Hope this helps.