Desperate in Alaska

Post-War Aeronca Chief airplanes
Post Reply
AChief46
Posts: 4
Joined: Fri Jan 07, 2005 03:18
Location: Seldovia Alaska
Contact:

Desperate in Alaska

Post by AChief46 »

Hey Guys & Gals needed one standard oleo assy A-Frame only. Axle was not damaged, but case frame was bent. Help please!!!! Thanks & keep the wind over the wings.
Ron Babos
Posts: 571
Joined: Thu Nov 18, 2004 16:23
Location: Woodstock, Ont, Can
Contact:

case frame

Post by Ron Babos »

Achief46: Happen to have one laying around . Good shape. Bushing has been removed but have new one to install . $350 with bushing plus shipping. Pm me if interested.
Ron
Before you believe anything I say, check with two more people. If they agree, I must be right.
AChief46
Posts: 4
Joined: Fri Jan 07, 2005 03:18
Location: Seldovia Alaska
Contact:

chief landing gear

Post by AChief46 »

To all who are concerned. AChief46 has located used A-frame Oleo & installed. Will attempt ferry to Willow AK for installation of Carl Bahns Hydrasorb gear soon. Thanks to all who helped.
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

We want pictures of that Bahn gear when you get it on! :D
Please.

nkh
7AC-5691
Super 85-12F @ DVK
AChief46
Posts: 4
Joined: Fri Jan 07, 2005 03:18
Location: Seldovia Alaska
Contact:

Desprate in Alaska

Post by AChief46 »

Some fella sent me an e-mail that he has a pair of standard oleos for sale, wife inadverently deleted the message. Still need at least one standard oleo. Please resend message. Thanks AChief.
AChief46
Posts: 4
Joined: Fri Jan 07, 2005 03:18
Location: Seldovia Alaska
Contact:

Desperate in Alaska

Post by AChief46 »

Plane is at Carl Bahns hanger in Willow Ak. He has a set of The gear mounted on a 7-AC Champ. Will take pic & try to post it ASAP. AChief
kevin mielke
Posts: 25
Joined: Thu Mar 23, 2006 23:52
Location: Wasilla Alaska

Post by kevin mielke »

my champ is in willow to. I have several oleo's will look tomorrow and see if I have any standards
N82192 7CCM
Post Reply