Page 2 of 2
Posted: Sat Sep 29, 2007 19:04
by Mikek
Robert Henley wrote:NC83401 wrote:Does anyone have photos or drawings of the tank installation? Are the tanks FAA/PMA or is it an STC? How are the lines routed from the tank to the engine? Do the tanks feed to the main tank or is there a switch?
Here are some pictures from my project. I didn't do the work; it was completed before I purchased the project.
Would you have the manufacture or Part# for the valve shown if the picture?
Mikek
Posted: Sat Sep 29, 2007 21:10
by Nathan K. Hammond
Sorry Mike, I don't know what they use. Might ask Mike Utley, he should know.
nkh
Posted: Sun Sep 30, 2007 11:59
by Jody Wittmeyer
It sure looks like an imperial from the back side!
Posted: Sun Sep 30, 2007 12:48
by Robert Henley
"Would you have the manufacture or Part# for the valve shown if the picture?"
Mike
The drawings with the STC say "1/4 FPT Shut Off Valve - 6-631-000" My guess you could call Wag-Aero and ask for that part number as referenced in their STC and get what you might need.
Regards
Posted: Sun Nov 04, 2007 02:57
by joea
Mark,
Hows progress going on the Champ?
Joe