Need 337 for C-85-12 conversion

rudymantel · Post by **rudymantel** » Wed May 30, 2007 20:02

Does anyone have an approved 337 for converting a 7AC to a C-85-12 engine ?
How about an STC ?
Thanks,
Rudy

Mikek · Post by **Mikek** » Wed May 30, 2007 20:45

rudymantel wrote:Does anyone have an approved 337 for converting a 7AC to a C-85-12 engine ?
How about an STC ?
Thanks,
Rudy

Do a search on this site here is one

http://www.joea.com/phpBB2/viewtopic.php?p=8667#8667

rudymantel · Post by **rudymantel** » Thu May 31, 2007 05:40

Thanks Mike- I'll look at both Lasher and Wagner STC's.

How can I look at them without actually buying ? The airplane I have in mind is already converted but no documents and I'm trying to determine if it conforms with an approved installation.

I believe the C-85-12 has also been installed with just a 337. Is that true ? If so, does anyone have a copy of such a 337?

Rudy

Mikek · Post by **Mikek** » Thu May 31, 2007 06:59

rudymantel wrote:Thanks Mike- I'll look at both Lasher and Wagner STC's.

How can I look at them without actually buying ? The airplane I have in mind is already converted but no documents and I'm trying to determine if it conforms with an approved installation.

I believe the C-85-12 has also been installed with just a 337. Is that true ? If so, does anyone have a copy of such a 337?

Rudy

If you know the N# of the one your looking at or someone's N# that has the Mod get FAA CD about $10 & takes a week to get not bad for the FAA.

It has all the info that was sent it to the FAA from Day One. Should have what you are looking for.

Also call wagner and lasher the should be able to send you something to look at.

http://162.58.35.241/e.gov/ND/airrecordsND.asp

rudymantel · Post by **rudymantel** » Thu May 31, 2007 08:04

Mike thanks very much- that's a good idea !
Rudy

National Aeronca Association Bulletin Board

Need 337 for C-85-12 conversion

Need 337 for C-85-12 conversion

Re: Need 337 for C-85-12 conversion