I just got my Champ put on Floats and I am in need of some type of graph for the weight and balance. I need this for my checkride.
The Champ is a 7AC-CONV with an 0-235.
Keith
Need W&B Chart
- Mikek
- Posts: 594
- Joined: Sat Nov 13, 2004 21:13
- Location: Yellow Springs, Ohio 45387 [3OH0]
- Contact:
Re: Need W&B Chart
I do not think you will find a factory graph but you can use the TC data sheet to get the info.WWhunter wrote:I just got my Champ put on Floats and I am in need of some type of graph for the weight and balance. I need this for my checkride.
The Champ is a 7AC-CONV with an 0-235.
Keith
http://aeronca.com/TCDS/a-759.pdf
Not sure what a 7AC-CONV on floats with O-235 engine is called, S7CCM
Should have Weight & Balance data from when floats where added, start with that.
Check page 4.
Now it will give you a forward CG limit **.* inches and a rearward CG Limit **.* inches.
Now back to basics:
mikek
Mike Knemeyer
1410 Meadow Lane
Yellow Springs,Ohio 45387
3oh0
N83348 7AC-2015
N82146 7AC-772
1410 Meadow Lane
Yellow Springs,Ohio 45387
3oh0
N83348 7AC-2015
N82146 7AC-772
- Nathan K. Hammond
- Posts: 2371
- Joined: Wed Nov 17, 2004 00:22
- Location: Danville, KY (DVK)
- Contact:
Keith, here's an online W&B calculator, if that will help. I think the chart would be a simple square, although I've never seen one for a Champ.
http://aeronca.westmont.edu/memberpages/cg.html
nkh
http://aeronca.westmont.edu/memberpages/cg.html
nkh
7AC-5691
Super 85-12F @ DVK
Super 85-12F @ DVK