National Aeronca Association Bulletin Board

Hey guys, I messed up the squelch dial on a TKM MX11 Comm radio. It just clicks and won't squelch the radio.

Any suggestions on where to get it repaired?

Never even heard of this brand, so no idea.

If it is the type I am thinking they are made in the Phoenix area nad sending it to them with the problem and they will repair it for a set price.
Keith

I had 2 TKM radios in my 182 when I bought--their email address then was TKMRADIOS@aol.com Try it and if you can't get them I will look up the address and the rest of the info.

They are slip in replacement radios for KX-170B's, Narco's and the like.

They were good radios -- the repair service was good if needed.

I replaced them with a complete King stack as the other radios, adf, dme and transponder were old stuff. Didn't have trouble selling one. Still have one that has built in COMM/VOR/ILS/GS.

Doug

Finding some interesting stuff about them.

At first came up with this:

Contact Information about TKM Inc

Address: 14811 N 73rd St
Scottsdale, AZ,
85260-3107
Phone: 480-991-5351
Fax: 480-991-3759
Website: www.tkm.com

~~~~~

Problem is that the website shown is NOT for TKM radios.

Then found this:

http://www.hawkinsassoc.com/contact_us.html

And this is the radio:

http://www.hawkinsassoc.com/Products/TK ... /mx11.html

Gives you a bit to start with.

Thanks guys............looks like one of those deals where it's $475 to repair and $476 to replace.


.

Darn, that seems high. I had mine repaired a couple of years ago and I thought it was $125 flat rate repair. If I can find the bill I'll let you know. It was in Scottsdale and I picked it up personally.
Good Luck,
Keith

Chris,

If you can get a new one for $475, then do it. Just looked on Ebay and they are going in the $6-900 range.

Joe A

If you decide to off the old one I would love to have it for parts. I like working on radios and am always needing bone yard parts.