Page 1 of 1

Scat Hose to Exhaust

Posted: Mon Apr 19, 2010 10:23
by mtw
One of the guys at the airport was looking at the Chief and noticed that on the left side there is no scat hose going from the front baffling at the nose down
to the muffler cuff. This is the same side that comes off the cuff to the heat box, which I don't have. He said this helps cool the exhaust stack and could case a hot spot and possibly an over-heated cylinder? So basically on this side I have the cuff on the exhaust stack with nothing connected to it.

I do not know and wanted some input to see if it was something that does need adding or if it is a non-issue.

Thanks,

Todd Wilemon
Aberdeen, MS

Re: Scat Hose to Exhaust

Posted: Fri Apr 23, 2010 00:14
by Nathan K. Hammond
Having the SCAT hose on or off doesn't really affect anything. You'll do no harm either way because the little Continentals don't make that much heat (BTU's to be exact.)

"helps cool the exhaust stack and could cause a hot spot and possibly an over-heated cylinder"....... sounds like urban legend.

nkh

Re: Scat Hose to Exhaust

Posted: Fri Apr 23, 2010 08:11
by mtw
Nathan,

Thanks for the info. I was thinking along those lines but wanted some more input.

Todd

Re: Scat Hose to Exhaust

Posted: Mon Jun 14, 2010 21:49
by Tim Juhl
You have no cabin heat? How do you keep your left foot warm in the cold weather? :lol: Do you have a plate covering the hole in the firewall where the heater box was?

If you aren't using the muff on the left side you might consider taking it off. They'll fit either side and you can keep it as a spare for the carb heat.

Tim

Re: Scat Hose to Exhaust

Posted: Tue Jun 15, 2010 08:10
by mtw
Appreciate the input Tim.

Todd