I need the upper mixture control valve disc. Part # P61030. Does anyone have one? Or an idea of where to get one?
Dave
Need Stromberg NA-S3A carb part
-
David Nielsen
- Posts: 23
- Joined: Fri Oct 29, 2010 20:29
- Location: Hendersonville NC
- Contact:
Re: Need Stromberg NA-S3A carb part
Ha, wish I knew where a handful of these were! In the old days they wired the mixture control shut or just took it off. Am guessing that they were tossed. Now with fuel costing $4 a gallon they are real popular again.David Nielsen wrote:I need the upper mixture control valve disc. Part # P61030. Does anyone have one? Or an idea of where to get one?
Dave
Years ago places like Fresno Air Parts and El Reno used to have parts like this but not sure these days. Might try them.
Joe A
-
Mikek
- Posts: 594
- Joined: Sat Nov 13, 2004 21:13
- Location: Yellow Springs, Ohio 45387 [3OH0]
- Contact:
Re: Need Stromberg NA-S3A carb part
Dave I should have a few used carb,s with that plate, is yours bad or just missing. PM your address and I will check this week-end and send you one.David Nielsen wrote:I need the upper mixture control valve disc. Part # P61030. Does anyone have one? Or an idea of where to get one?
Dave
Mike K
cell 937-684-5998
Mike Knemeyer
1410 Meadow Lane
Yellow Springs,Ohio 45387
3oh0
N83348 7AC-2015
N82146 7AC-772
1410 Meadow Lane
Yellow Springs,Ohio 45387
3oh0
N83348 7AC-2015
N82146 7AC-772
-
David Nielsen
- Posts: 23
- Joined: Fri Oct 29, 2010 20:29
- Location: Hendersonville NC
- Contact:
Re: Need Stromberg NA-S3A carb part
MikeK came through with the valve I needed. Thanks Mike and to all the great people on this list. If there is anything I can do for others Let me know.
Dave
Dave