Page 1 of 1
Hinge Pins
Posted: Mon May 30, 2011 16:50
by Champ Dreamer
I have completed my re-cover job and am about to reassemble my Champ. I want to replace the hinge pins on the rudder and elevators (AN394-71) and have been unable to find them after checking the usual suspects (Univair, Spruce, Wicks Wag). Any suggestions?
Thanks,
Brian Walker
'46 7AC N1197E
Re: Hinge Pins
Posted: Mon May 30, 2011 17:14
by Nathan K. Hammond
For the hard to find hardware, I've always had good luck with Genuine Aircraft Hardware.
http://www.gen-aircraft-hardware.com/st ... e=AN394-71
But this is the current replacement.
http://www.gen-aircraft-hardware.com/st ... 20392-3C71
nkh
Re: Hinge Pins
Posted: Mon May 30, 2011 17:28
by Nathan K. Hammond
Be sure to request a catalog. As thick as Spruce's with nothing but hardware!
nkh
Re: Hinge Pins
Posted: Mon May 30, 2011 23:32
by Champ Dreamer
Thanks so much, ordered those and a lot more from those folks !
Brian Walker
N1197E 7ac/dc