National Aeronca Association Bulletin Board

I have a halon wilson exhaust system in good shape that came off an (85-8)7 DC aeronca that was crushed in a hanger collapse I am looking to sell. Can send some pic's if interested, or try to answer any question you might have. $400.00 or B.O. plus shipping Steve [ system has been sold]

The exhaust system that I have came off an 7DC with an cont. 85-8 . Would anyone know if this would fix any other cont. engine with or without a starter. I think that there are some parts that will fit a 65 to an 0-200. Someone asked if this would fit an 0-200 cont. and I don't know for sure, would like to give an honest answer if asked again. Thanks for any help Steve

Steve,
The HW exhaust should fit everything from the A65-0200 as it's basically the same fit as a Cessna 150 exhaust that I've used on both my 65 and 0200 Champs. The only real difference is the tail pipe outlets through the lower cowl are different for a Cessna 150 system and require some relocation. Best of all the HW are type certified for the Champs, Chiefs, etc. whereas the Cessna 150 requires a 337 field approval. That's a good price for the HW exhaust system. Have you pulled the tail pipes and looked inside with a flash light to check for burned out baffles?

Mike

Steve do you still have the system for sale? If it is not damaged I am interested in it.