National Aeronca Association Bulletin Board

Since I have been unable to find a text document format acceptable to the Forum software, I am going to list a number of drawings which I desire to have for my McDowell project on my Chief in messages. If any of you can help by providing any of these to me by any means on-forum, pm, personal E-Mail (t-mail51a@gmail.com) w/0 parens I would appreciate it very much. There are a lot of data needed so I will be posting several messages each listing only 10 or so drawings.

Dale

First Ten:
Title
BODY PLATE SA 1
SPRING REST SA 2
BEARING SPACER SA 3
SHEAVE WHEEL SA 4
PAWL SA 5
PAWL SA 6
PAWL SA 7
MAIN SPRING SA 8
PAWL LIFT SA 9
CAMPLATE SA 10

Dale,

Jim H has offered you a McDowell starter he has on the f-AA maillist. It appears to be half the cost you will incur fabricating your own parts.

The drawings, if they are available, should be at the Aeronca Museum site that Todd Trainor operates.

Let us know if you need contact information

Call me @ 304-788-1974.
I have some drawing for the McDowell starter,I will be leaving about 11:00 AM Friday 21FEB 2014 and will be back home Saturday 22 FEB 2014 late 9 or 10 PM
. Call now if you can.

Bill

Call me @ 304-788-1974.
I have some drawing for the McDowell starter,I will be leaving about 11:00 AM Friday 21FEB 2014 and will be back home Saturday 22 FEB 2014 late 9 or 10 PM
. Call now if you can.

Bill