varnish for wing spars

A section to provide help and assistance to anyone restoring their airplane.
Post Reply
User avatar
powers
Posts: 147
Joined: Fri Oct 26, 2007 23:23
Location: Lawrenceville GA
Contact:

varnish for wing spars

Post by powers »

Any tips on varnishes for my new wing spars? I've heard that marine varnish is good. Some people have suggested home depots best. Any ideas?
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

2-part Thats the key. 1 part varnish, like Minwax or Spar-Varnish doesn't have the service life, and can be lifted with solvents such as MEK, acetone etc... 1-part will eventually start to fail and flake off as well.

The covering process you choose should have something or recomend a product. PolyFiber and Randolf both use EV-400, their homebrew 2-part epoxy varnish.

nkh
7AC-5691
Super 85-12F @ DVK
User avatar
powers
Posts: 147
Joined: Fri Oct 26, 2007 23:23
Location: Lawrenceville GA
Contact:

Post by powers »

Thanks! I've been looking at the EV-400 product. I just did not know if 2 part epoxy was necessary. I'll order it in the morning.
Paul Agaliotis
Posts: 2589
Joined: Wed Dec 08, 2004 18:49
Location: San Martin, California
Contact:

Post by Paul Agaliotis »

I use the West Systems epoxy. They have a product designed for wood protection that will not bother the glue joints.
Paul
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046
User avatar
powers
Posts: 147
Joined: Fri Oct 26, 2007 23:23
Location: Lawrenceville GA
Contact:

Post by powers »

I used resorcinal glue. Will the EV-400 epoxy bother my the glue.
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

Nope. You're safe.

nkh
7AC-5691
Super 85-12F @ DVK
User avatar
powers
Posts: 147
Joined: Fri Oct 26, 2007 23:23
Location: Lawrenceville GA
Contact:

Post by powers »

Mr. Hammond I see that you are located at GA2. I'm only about an hour drive from there, and I'll be looking for hangar space when my plane is done around March. Is there any Available?
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

Mr. Hammond???? That's what they call me when I'm in trouble! :lol:

I'll send you an email.

nkh
7AC-5691
Super 85-12F @ DVK
User avatar
joea
Site Admin
Posts: 5993
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Post by joea »

Nathan K. Hammond wrote:Mr. Hammond???? That's what they call me when I'm in trouble! :lol:

nkh
And I bet you hear that fairly often! :)
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

More than you know! :P

nkh
7AC-5691
Super 85-12F @ DVK
User avatar
joea
Site Admin
Posts: 5993
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Post by joea »

Nathan K. Hammond wrote:More than you know! :P

nkh
Its better than hearing "Honey, is there anything I can do to help you?" because you know that she needs something that is going to cost you a lot of money! Shoes, handbags, watches, diamonds and so on... :)
Post Reply