panel

Post-War Aeronca Champ airplanes
Post Reply
BSimpson
Posts: 5
Joined: Tue Oct 25, 2005 17:26
Location: Huntersville, NC
Contact:

panel

Post by BSimpson »

D :D oes anyone have the layout or template for the instruments on an 46' champ, I would like to get the layout as original as possible.
Mnflyer
Posts: 312
Joined: Sun Jul 09, 2006 17:08
Contact:

Champ Panel layout

Post by Mnflyer »

Hi heres a site with L-16 manuals they would be about as close as one can get. http://www.pj260.com/manuals.htm

The picture isn't the best guess its been copied too many times.
As best I can tell, looking at the panel: Left to right Tachometer next the cabin heat control, Altimeter, Oil temp gage, Up in the cover the Fuel gage, in the middle a slip/ball below that the compass card below that placard, next to the right oil pressure gage, Compass, engine primer and then the Airspeed indicator,
:D
GB MN.Flyer
Flying a Champ 7DC and a HKS Kitfox III
CptKelly
Posts: 673
Joined: Thu Jan 05, 2006 09:14
Contact:

Wow....

Post by CptKelly »

Thanks MnFlyer,
What a wealth of information. I'll refer to that info many times in the future.

Mike
User avatar
NC83401
Posts: 18
Joined: Mon Jun 04, 2007 21:45
Location: Coatesville, PA KMQS
Contact:

Re: panel

Post by NC83401 »

BSimpson wrote:D :D oes anyone have the layout or template for the instruments on an 46' champ, I would like to get the layout as original as possible.
Are you talking about a 7AC?

We laid ours out based on the drawing in the "7A Aeronca Champion Service Manual"

Image

Image

This is a picture of the panel when we bought the project. It looks like the service manual drawing with the addition of 2 instruments above the original position of the oil temp and oil pressure gauges.

Image

You can see photos of Bob and Harold Armstrong's Champ on the following link. You will see that they placed the oil temp and oil pressure gauges higher on the panel than we did. We looked at these pictures and decided the drawing in the service manual was probably the correct placement.
They also placed their compass card in the upper middle position. We placed ours directly above the compass in accordance with the service manual drawing

http://www.geocities.com/mrpeters.geo/AeroncaInter.html
Mark Macario
1946 7-AC NC83401
1946 C-140 NC81059
User avatar
Jody Wittmeyer
Posts: 591
Joined: Wed Nov 17, 2004 13:47
Location: Kewanee, IL. (EZI)
Contact:

Post by Jody Wittmeyer »

I didn't see the tires listed in that part of the manual. :lol:
Blue Skies and Stay Safe, and preserve 'em
BSimpson
Posts: 5
Joined: Tue Oct 25, 2005 17:26
Location: Huntersville, NC
Contact:

Post by BSimpson »

Thanks guys for the help on the instrument panel! I forgot about my service man, hope to have some pictures in the spring.
User avatar
joea
Site Admin
Posts: 5993
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Post by joea »

Jody Wittmeyer wrote:I didn't see the tires listed in that part of the manual. :lol:
Jody,

Those are just part of the temp. weight and balance tools! :)
User avatar
Jody Wittmeyer
Posts: 591
Joined: Wed Nov 17, 2004 13:47
Location: Kewanee, IL. (EZI)
Contact:

Post by Jody Wittmeyer »

Good, just confirms mine IS original like that. Just had to use bigger tires
Blue Skies and Stay Safe, and preserve 'em
User avatar
marklamon
Posts: 284
Joined: Sun Jul 03, 2005 02:28
Location: Pensacola, FL 16FL J-22 Ranch
Contact:

Post by marklamon »

joea wrote:
Jody Wittmeyer wrote:I didn't see the tires listed in that part of the manual. :lol:
Jody,

Those are just part of the temp. weight and balance tools! :)
I thought it was one of those things that old Champ drivers sits on so their exhaust port don't get sore. Mark
Post Reply