Where is the standard Ident plate location on a 7AC? It's been so long since I took it off I can't remember. NC85411 will be airborne and good for another 60 years in about 2 weeks.
Gary DeBaun
Lakeville, MN
Ident Plate Location
Gary,
In the Service and Parts Manual book I have, under Figure 19 Fixed Equipment Installation, It shows that the ID Plate is attached to the floor just in front of the Right Aileron Bellcrank Cover and in a bit from the right Longeron. No measurements are given, but it looks like about 3/4 inch or so from each.
Hope this helps,
In the Service and Parts Manual book I have, under Figure 19 Fixed Equipment Installation, It shows that the ID Plate is attached to the floor just in front of the Right Aileron Bellcrank Cover and in a bit from the right Longeron. No measurements are given, but it looks like about 3/4 inch or so from each.
Hope this helps,
Don
7DC Champ
N84032
7DC Champ
N84032
Data Plate
Thanks Don, I'll be flying her over for the burger nights here shortly...
Gary
Gary