Connecting rod A series

Bob Greenwall · Post by **Bob Greenwall** » Tue Mar 04, 2008 17:16

My A-50 has early rods (#5315) except for one C-85 rod (A35160) Believe early 65 rod would work...nuts are on cap side...I need an early one, do you need an 85 rod? -Bob Greenwall

Paul Agaliotis · Post by **Paul Agaliotis** » Wed Mar 05, 2008 08:01

Bob,
I think I have a few of the early rods. I'll check this afternoon and we can just swap.
Paul

Paul Agaliotis · Post by **Paul Agaliotis** » Thu Mar 06, 2008 08:32

Bob,
I pulled out the A50 stuff. I have an early rod from a dry sump engine but it is missing the cap. The beam is cast with the number 5103. It should only be used in the A50-1,-2,-3 and has the bolt in the rod and nut on the cap. I also have a set of the later rods. They are cast with 5104 in the beam. I believe they are p/n A35158, which are late A50 and early A65.
If this will help let me know.
Now you realize that these parts will only work in Aeroncas.
Paul

Paul Agaliotis · Post by **Paul Agaliotis** » Fri Aug 29, 2008 12:40

Bob,
I found the rest of the rod. I sent you a PM.
Paul