C85 oil spring

Parts for Aeronca airplanes for sale
Post Reply
1quick46
Posts: 42
Joined: Fri Mar 07, 2008 19:39
Location: Monrovia Md
Contact:

C85 oil spring

Post by 1quick46 »

Hey all, I was just taxiing around today for the weekly warm up and my oil pressure started going nuts, after my heart stopping i calmed down and checked it out... the pressure relief spring was broken..does anybody know where I can get a new one.
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

About any engine overhaul shop or parts warehouse will have it.

El Reno Aviation = (405) 262-8805
Fresno Airparts = (559) 237-4863
Don's Dream Machines = (770) 412-8885

nkh
7AC-5691
Super 85-12F @ DVK
CptKelly
Posts: 673
Joined: Thu Jan 05, 2006 09:14
Contact:

Try...

Post by CptKelly »

Try Don Sword, at Don's Dream Machines in Griffin Georgia.

Mike
1quick46
Posts: 42
Joined: Fri Mar 07, 2008 19:39
Location: Monrovia Md
Contact:

Post by 1quick46 »

Thanks for the phone numbers, I just got the parts from El Reno, hopefully I'll be in the air again Saturday....
User avatar
Nathan K. Hammond
Posts: 2371
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond »

Might be safe idea to piece the broken spring back together, to make sure all pieces are accounted for. Running a magnet down the filler neck and sweeping across the bottom of the oil tank is a good idea; and cheap insurrance.

nkh
7AC-5691
Super 85-12F @ DVK
MikeB
Posts: 3246
Joined: Wed Nov 17, 2004 17:07
Location: Western Wisconsin
Contact:

Post by MikeB »

Nate makes a good point (looking for broken pieces). After 50 years of working on engines from 18 wheelers on down, I've never seen a broken oil pressure spring :? . Weak or rubbed but never literally broken. It certainly could ruin your whole day, though.

Having said that, a couple of years after I sold my Cherokee (150 Lycoming) the new owner said the oil pressure dropped to the low side of the green or about 60 psi where it used to carry 85-90 psi hot at cruise. It wound up being the relief valve and spring that was causing the problem.

Mike B.
1quick46
Posts: 42
Joined: Fri Mar 07, 2008 19:39
Location: Monrovia Md
Contact:

Post by 1quick46 »

Thanks for the tips, no metal found anywhere in the tank. the spring was just rubbed shiny, and thin in the middle right where it broke. I installed it last night and have 45 lbs cold pressure. :D
Post Reply