65 Continentail Single Mag Rear Case

Engine and powerplant parts wanted or for sale
Post Reply
Captgrumps
Posts: 790
Joined: Tue Jan 17, 2006 20:18
Location: Georgia GA10/OPN
Contact:

65 Continentail Single Mag Rear Case

Post by Captgrumps »

When was the last time you saw one?
Keep the pointed end forward--
The dirty side down.....
And the blue skies on top....
MikeB
Posts: 3246
Joined: Wed Nov 17, 2004 17:07
Location: Western Wisconsin
Contact:

Post by MikeB »

How about 'never' :wink: ???? Unfortunetely, I got into the vintage aircraft late in life............. What were they used on??

Mike Berg
User avatar
joea
Site Admin
Posts: 5993
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Post by joea »

Doug,

What is this for, an early 50 hp version?

Joe
Captgrumps
Posts: 790
Joined: Tue Jan 17, 2006 20:18
Location: Georgia GA10/OPN
Contact:

Post by Captgrumps »

Joie-

The single ignition was use on the Continental

A-50-1, -4 and -7

And on the

A-65-1 and -7

My 1939 Chief had a A-65-7 (single iginition) and I converted it to dual ignition and put the old single engine rear case in the hangar loft years ago---have been cleaning it out and got it down today--also misc, Aeronca parts and a zilion other pieces of a 50 year collection.

The single ignition was banned by the CAA I believe about 1940 for certification. Will have to check my archives for the exact date.

Doug
Keep the pointed end forward--
The dirty side down.....
And the blue skies on top....
Captgrumps
Posts: 790
Joined: Tue Jan 17, 2006 20:18
Location: Georgia GA10/OPN
Contact:

Post by Captgrumps »

Joe--

Sorry about that my fingers were faster than my brain. OF's are excused I am told.

Doug
Keep the pointed end forward--
The dirty side down.....
And the blue skies on top....
User avatar
joea
Site Admin
Posts: 5993
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Post by joea »

Doug,

Have seen photos of these rear cases but not one in person.

Hope you find a good home for most of that interesting stuff!

Joe
Paul Agaliotis
Posts: 2589
Joined: Wed Dec 08, 2004 18:49
Location: San Martin, California
Contact:

Post by Paul Agaliotis »

Doug,
You don't have the mag drive do you? I'm missing a few items on a A50-1 that I have. If you decide to part with some of your stuff let me know.
Paul
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046
Captgrumps
Posts: 790
Joined: Tue Jan 17, 2006 20:18
Location: Georgia GA10/OPN
Contact:

Post by Captgrumps »

Paul-

I am still cleaning the overhead and sorting stuff out--will look for the drive .

Doug
Keep the pointed end forward--
The dirty side down.....
And the blue skies on top....
Paul Agaliotis
Posts: 2589
Joined: Wed Dec 08, 2004 18:49
Location: San Martin, California
Contact:

Post by Paul Agaliotis »

Thanks Doug,
This engine is for my KCA. It had an A65 and Champ cowl, I want to get it closer to original.
My engine is s/n 10971 and a pretty early dry sump model. The intake uses gland nuts like the 220 Continental. I have a spare set of cylinders but they have different intake set up. More like the A65 with a different elbows at the heads.
I would also like to find the original cast exhaust manifolds. I have only seen pictures of them. All of the locals,that would know about them, say they are trash and were thrown away on about the third flight. I guess I'm not afraid of a challenge.
As time marches on there are fewer people that know much about this old junk. Thank you for your help.
Paul
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046
Post Reply