C85-12 engine needed

RRHaldeman · Post by **RRHaldeman** » Wed Jan 27, 2010 18:42

OK, I bought my 1946 Aeronca 7AC; and now I want to add a C85-12 so I can add a starter and battery using the Lasher STC. Any clues as to where I start locating a C85-12?

Post by **joea** » Wed Jan 27, 2010 19:05

First off, Welcome on board! Using a first name would be nice, we are a friendly group here.

Ebay has them from time to time but be careful there. Also Barnstormers has them often.

Joe A

Paul Agaliotis · Post by **Paul Agaliotis** » Wed Jan 27, 2010 20:29

I've found the best deals locally. Find out where the vintage airplane people hang out and ask around.
Paul

frebrdhd · Post by **frebrdhd** » Thu Jan 28, 2010 11:38

If your looking for a C-85-12f contact Larry Glen in NC he has a complete for sale and is a good guy to deal with.

Give him a call at 919-496-5036

RRHaldeman · Post by **RRHaldeman** » Thu Jan 28, 2010 18:11

frebrdhd wrote:If your looking for a C-85-12f contact Larry Glen in NC

Thanks, I did and the 12f is sold but he will keep his eyes out for another one for me.

RRHaldeman · Post by **RRHaldeman** » Mon Mar 01, 2010 12:33

RRHaldeman wrote:OK, I bought my 1946 Aeronca 7AC; and now I want to add a C85-12 so I can add a starter and battery using the Lasher STC. Any clues as to where I start locating a C85-12?

Found one. Bought it.

RRHaldeman · Post by **RRHaldeman** » Wed May 05, 2010 20:57

Just an update on my engine. I found a used C85-12, bought it, as is, and I am now helping my A&P put the overhauled engine together and it is really fun. Took the advice of many seasoned Champ owners and bought a new O-200 crank, new cylinders, piston, rings, etc. I also found a Marvel Schebler recently overhauled carb, so the engine not only looks good (we put all four cylinders on today) but it will perform well. If I get it ready, and I think I will, I will see everyone at Middletown in June.

Post by **joea** » Wed May 05, 2010 23:04

Sounds great, keep us updated!

Captgrumps · Post by **Captgrumps** » Thu May 06, 2010 01:05

Where did you get your cylinders from?

RRHaldeman · Post by **RRHaldeman** » Fri May 07, 2010 21:23

My mechanic bought them for me. I know they are new ECI cylinders, but I don't know where he got them.

MikeB · Post by **MikeB** » Sat May 08, 2010 12:36

I bought new ECI nickel cylinders (0200) from DART in Texas. The price was $888 but the shipping was free. I had to buy the wrist pin though. I think the price was about $35 for the pin. Basically the prices seem to be about the same no matter where you get them, other than the shipping.

MikeB

National Aeronca Association Bulletin Board

C85-12 engine needed

C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed

Re: C85-12 engine needed