Hi Folks ...
I am rebuilding wings on our 7ac.
Does anyone know where I can get a set of wing drawings?
Please reply to this post, and also to my direct email address.
Thanks,
Tom Sampson
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Need Wing Drawings
-
TomSampson
- Posts: 9
- Joined: Mon Jul 11, 2011 16:07
- Contact:
Need Wing Drawings
Tom Sampson
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
-
Mikek
- Posts: 594
- Joined: Sat Nov 13, 2004 21:13
- Location: Yellow Springs, Ohio 45387 [3OH0]
- Contact:
Re: Need Wing Drawings
Did you find a drawing if not I can see if I have one, might have one on disk.TomSampson wrote:Hi Folks ...
I am rebuilding wings on our 7ac.
Does anyone know where I can get a set of wing drawings?
Please reply to this post, and also to my direct email address.
Thanks,
Tom Sampson
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Mike Knemeyer
1410 Meadow Lane
Yellow Springs,Ohio 45387
3oh0
N83348 7AC-2015
N82146 7AC-772
1410 Meadow Lane
Yellow Springs,Ohio 45387
3oh0
N83348 7AC-2015
N82146 7AC-772
-
TomSampson
- Posts: 9
- Joined: Mon Jul 11, 2011 16:07
- Contact:
Re: Need Wing Drawings
Thanks Mike!!
Tom
Tom
Tom Sampson
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Re: Need Wing Drawings
Tom,
Sorry to chime in late here.
Do you still need wing drawings?
If you have the numbers off of the blueprints, any of us at the NAA can provide you with the factory blueprints.
Joe
Sorry to chime in late here.
Do you still need wing drawings?
If you have the numbers off of the blueprints, any of us at the NAA can provide you with the factory blueprints.
Joe
-
TomSampson
- Posts: 9
- Joined: Mon Jul 11, 2011 16:07
- Contact:
Re: Need Wing Drawings
Hi Joe ...
Thanks for the post.
I am nearly done with both wings from a construction standpoint, and will be covering in Early march.
What I need is a drawing that illustrated WHERE to put the inspection rings!!
Can you assist?
Regards, Tom
Thanks for the post.
I am nearly done with both wings from a construction standpoint, and will be covering in Early march.
What I need is a drawing that illustrated WHERE to put the inspection rings!!
Can you assist?
Regards, Tom
Tom Sampson
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Portland, Oregon
thomas.eh.sampson@frontier.com
Minimax built and sold
Aeronca 7ac wings being rebuilt
Vans RV 9a built and sold
Vans RV 7 built and flying
EAA Tech Advisor
EAA Flight Advisor
Re: Need Wing Drawings
Best I can recommend is to ask people on this bulletin board for some photos of their wings with the fabric on it. Normally when taking the old fabric off we try to save it so that you can tell where the inspection covers were placed.