L3-B Shoulder harness setup
L3-B Shoulder harness setup
Howdy: L3-B N47185 has a 4 point harness with the shoulder straps attached to an inertial reel behind the seat. I would feel much more comfortable if the shoulder harness attached above and behind my shoulders, much like my 7AC setup. Anybody have any thoughts on this? Thanks. Doc
Doc - 1T8
1943 O-58B NC47185 (43-26975)
1946 7AC NC2241E - "Dearly Departed"
EAA TC #5453 CAF Life #2782
FAA Senior AME #20969
"Leben ohne Reue"
1943 O-58B NC47185 (43-26975)
1946 7AC NC2241E - "Dearly Departed"
EAA TC #5453 CAF Life #2782
FAA Senior AME #20969
"Leben ohne Reue"
Re: L3-B Shoulder harness setup
I can answer my own query...I spoke with Wag Aero and they suggested a tube clamp for the diagonal cross tube with with a Y-harness bolted to that. It now works quite nicely. I also replaced both lap belts. Doc
Doc - 1T8
1943 O-58B NC47185 (43-26975)
1946 7AC NC2241E - "Dearly Departed"
EAA TC #5453 CAF Life #2782
FAA Senior AME #20969
"Leben ohne Reue"
1943 O-58B NC47185 (43-26975)
1946 7AC NC2241E - "Dearly Departed"
EAA TC #5453 CAF Life #2782
FAA Senior AME #20969
"Leben ohne Reue"
-
Red(neck) Barron
- Posts: 173
- Joined: Thu Feb 04, 2010 09:37
- Location: SE Iowa
- Contact:
Re: L3-B Shoulder harness setup
How did you go through the headliner?
Larry H
Sigourney, IA
Formally N84619, N84149 & N84069 - all1946 7AC's; also N57430 a 7ECA
Currently N91RA 7GCAA (Still a Champ, just grown up some)
Sigourney, IA
Formally N84619, N84149 & N84069 - all1946 7AC's; also N57430 a 7ECA
Currently N91RA 7GCAA (Still a Champ, just grown up some)
Re: L3-B Shoulder harness setup
I just have a slit in my headliner that I opened up to allow putting the clamp on and then I glued back the edges for cosmetic purposes.
Robert P. Kittine, Jr.WA2YDV
West Nyack Aviation, L.L.C.
New York, New York 631-374-9652
rkittine@aol.com
West Nyack Aviation, L.L.C.
New York, New York 631-374-9652
rkittine@aol.com