Chocks

jkvincent · Post by **jkvincent** » Sun Apr 01, 2007 23:36

Hey Joe, here's an idea, I liked what we did with the "Tow Bar" thread, you can "click" once and see a half-dozen examples, maybe we can do the same with chocks. anyway, ...simple, easy, light weight, cheap, 1 1/2" PVC. Glue them just snug enough so you have to kick them out. Jim
Here's a helful tip, (assuming you made them snug), if they get harder to kick out, ...you're losing air pressure.

Post by **joea** » Mon Apr 02, 2007 00:13

Excellent idea, and light enough to carry around.

Joe

DELCOM · Post by **DELCOM** » Mon Apr 02, 2007 02:25

The chocks are nice but....... where did you get the landing gear attatch fairings shown in the picture? Cant say that I have seen any before. I really like the looks of them.

Del Chase

jkvincent · Post by **jkvincent** » Wed Apr 04, 2007 10:08

...I added a helpful tip about Air Pressure in my original post (above). Jim

Gene Morton · Post by **Gene Morton** » Wed Apr 04, 2007 11:29

I made a pair like this except I put a tee in the long side and put a 12" piece of pipe coming out at approx. 30deg. Then you don't have to kick 'em out. Just bend over a little and pull 'en out.