Goodyear brake pads for sale at Aircraft Spruce for $4.50!!!
Get them while the price stays reasonable. Could be a miss-print or new pricing but they have not been this price in years!
http://www.aircraftspruce.com/catalog/l ... dbrake.php
Goodyear brake pads for sale at Aircraft Spruce for $4.50!!!
Bent,
Great to see you on the forum!
Am in Basel Switzerland right now and on to Moscow on Friday. Flying a brand new Challenger 605 for 3 months, then back home.
I am not home anytime soon so cannot help you with the measurements, but home that someone can.
Pls have some Aquivit for me on the 24th! I will be in either Berlin or Moscow!
Merry Christmas to you and your family!
Joe
Great to see you on the forum!
Am in Basel Switzerland right now and on to Moscow on Friday. Flying a brand new Challenger 605 for 3 months, then back home.
I am not home anytime soon so cannot help you with the measurements, but home that someone can.
Pls have some Aquivit for me on the 24th! I will be in either Berlin or Moscow!
Merry Christmas to you and your family!
Joe
Bent:
If I get to the airport tomorrow, I'll see if I have a set that I can measure.
Barry Jay used to sell them for around $10.00. Of course when ACSS bought BJ out the price had to go up
. Check out the price of the GY clips..........enough to make you
. Seems like someone was selling 'uncertified/experimental only' clips at one time. Maybe on ebay, I can't remember.
Mike Berg
If I get to the airport tomorrow, I'll see if I have a set that I can measure.
Barry Jay used to sell them for around $10.00. Of course when ACSS bought BJ out the price had to go up
Mike Berg
"If God had intended man to fly He would have given us more money"
-
Captgrumps
- Posts: 790
- Joined: Tue Jan 17, 2006 20:18
- Location: Georgia GA10/OPN
- Contact:
MIKE
When the clip price got so high a machinest made a`die and produced the clip and even gave`some away. Since they have been out of production for years and had no identifiying marks on them who would know what was original or not. I worked years ago for a Spring Manufacturer and we made parts for everyone, springs, clips--you name it and there was no part number stamped on them and they were considered "original." We made cowl clips, hairpin clips by the barrel full and they were considered original by the sellers.
Doug
When the clip price got so high a machinest made a`die and produced the clip and even gave`some away. Since they have been out of production for years and had no identifiying marks on them who would know what was original or not. I worked years ago for a Spring Manufacturer and we made parts for everyone, springs, clips--you name it and there was no part number stamped on them and they were considered "original." We made cowl clips, hairpin clips by the barrel full and they were considered original by the sellers.
Doug
Keep the pointed end forward--
The dirty side down.....
And the blue skies on top....
The dirty side down.....
And the blue skies on top....
Doug,
Any idea where to get a few of these 'orginal type' clips? I'm hoarding a couple in case I break or lose one, but it would be nice to have a few spares. When I install the skis I have to pull the brake rotor, clips, etc. off.
I do silicone them in when I have the brakes on though. I have the square hole type.
Once the GY brakes are cleaned and adjusted properly they don't work all that bad. At least in comparision to the Champs with shoes we have on the field. Mostly important for turning or a tap now and then or taxing on hard surface ramps.
Thanks,
Mike
Any idea where to get a few of these 'orginal type' clips? I'm hoarding a couple in case I break or lose one, but it would be nice to have a few spares. When I install the skis I have to pull the brake rotor, clips, etc. off.
I do silicone them in when I have the brakes on though. I have the square hole type.
Once the GY brakes are cleaned and adjusted properly they don't work all that bad. At least in comparision to the Champs with shoes we have on the field. Mostly important for turning or a tap now and then or taxing on hard surface ramps.
Thanks,
Mike
"If God had intended man to fly He would have given us more money"
-
MIKE UTLEY
- Posts: 40
- Joined: Fri Oct 28, 2005 17:17
- Contact:
GOODYEAR BRAKE CLIPS
GOOD MORNING, WAG AERO SELLS GOODYEAR BRAKE CLIPS, PART NUMBER 95-3348, UNDER OUR CATALOG NUMBER D-320-000. WE HAVE 95 IN STOCK AS OF THIS POSTING AT THE PRICE OF $13.50 EACH.
THANK YOU, MIKE UTLEY.
THANK YOU, MIKE UTLEY.