wheel pants

MikeB · Post by **MikeB** » Tue Apr 10, 2007 19:26

How are the wheel pants attached on a Champ? I had pants on my Cherokee and they were attached at the axle (inboard) and on the axle outboard. Just trying to picture how they might be attached on a Champ (with Goodyears if that makes a difference).

Thanks,
Mike

Post by **joea** » Tue Apr 10, 2007 19:45

Mike,

There is usually a plate that attaches where the brake caliper bolts on, then that plate bolts to the wheel pant.

I have a couple of photos but no time to upload them right now.

Nathan K. Hammond · Post by **Nathan K. Hammond** » Tue Apr 10, 2007 23:26

Mike,

Most I've seen pick up the lower oleo bolt and then have tube slid into the axel with a bolt welded on the end for the outboard side.

nkh

Don't why those last 2 won''t load? But they still have a good link.

MikeB · Post by **MikeB** » Wed Apr 11, 2007 08:33

Thanks Joe and Nathan. Answers my question, especially the photos (ain't technology great). I'm trying to pick up a set of wheel pants for my Champ, mostly to keep the struts and bottom of the wings clean, but they often come without the mounting hardware. If so, I can probably manufacture something as it doesn't look that complicated.

Mike

Post by **joea** » Wed Apr 11, 2007 11:29

Mike,

Believe that I have a set of wheel pants in the hangar. If I get by there today will see if I have some mountain plates with them. If so will try to take photos of what they look like and get you some better photos.

Joe

Post by **joea** » Thu Apr 12, 2007 19:41

Mike,

Just back from the hangar and found some wheel pant mounting hardware.

Are you still looking for info on this?

Joe

MikeB · Post by **MikeB** » Thu Apr 12, 2007 21:11

Joe,
I think I have enough information from Nathan's post. If I need more I'll let you know. Thanks for the response.

Mike

NC83401 · Post by **NC83401** » Tue Sep 25, 2007 10:02

We have a set of original metal wheel pants with our 1946 7AC project. What is the correct color paint? We think it is the fuselage color (yellow). Is there any trim or markings on the wheel pants?

When we bought the airplane the pants and fuselage trim were painted red. In our local area the plane was called "little red shoes".

Thanks.

Post by **joea** » Tue Sep 25, 2007 10:48

Mark,

Take a look here: http://www.aeroncapilots.com/13nac_photos.htm

This will let you see how everyone else is painting their wheel covers and let you decide which one you like for your airplane. Many different styles to choose from.

Get them installed on the plane and fly it to Middletown next June and get your plane's photo on the website!

Joe

DELCOM · Post by **DELCOM** » Sun May 04, 2008 23:43

Was it ever determined where to get mounting hardware for Champ wheel pants. I recently picked up a NOS set of wag aero M-050-000 wheel pant s but no mounting hardware. I have looked thru all the catalougs but still cant find anything. Does anyone know of a good set anywhere. I really want to find these items and any help suggestions would be greatly welcomed.

Del

Post by **joea** » Mon May 05, 2008 02:59

Del,

Believe that most people are making the hardware themselves.

MIKE UTLEY · Post by **MIKE UTLEY** » Mon May 05, 2008 10:36

GOOD MORNING DEL, WAG AERO HAS PMA'D WHEEL PANT BRACKETS FOR CHAMP CATALOG NUMBERS AS FOLLOWS. INBOARD 2868 @$35.96 EA, OUTBOARD 18790 @&36.50 EA. WE HAVE ONE SET IN STOCK AT THIS TIME. WE ALSO HAVE AN UNAPPROVED WHEEL PANT BRACKET HARDWARE KIT IN OUR CATALOG ON PAGE 70, CATALOG NUMBER M-121-000 @ $98.30, I AM SHOWING 4 KITS IN STOCK.
THANK YOU

MIKE UTLEY

Post by **joea** » Mon May 05, 2008 15:09

Mike,

Thanks very much. That helps a lot.

Joe

DELCOM · Post by **DELCOM** » Mon May 05, 2008 21:35

Just so you all know. I called Mike Utley at wag and he was very informative about the pant mounts that I was inquiring about. He offered a non approved type that was less expensive and an approved type that in his opinion was of better refinement. I was great to get such knowlagble help. Yes they were in the wag catalouge, just not easy for me to pick out exactly what I was looking for.......... Have you ever experienced your looking right at it but still can not see it? That was me. Any way Mike Utley in my opinion is a great asset to us all.
(and also to Wag Aero)

Del

Post by **joea** » Mon May 05, 2008 22:24

Del,

If you liked Mike on the phone, you would really enjoy talking with him in person!

Pls email the owners of Wag Aero and try to get them to change their minds and come to Middletown!

Joe