Lewis Propellers

General discussion and guidelines
Post Reply
EDGEFLY
Posts: 397
Joined: Wed Jun 13, 2012 19:06
Location: NORTHCENTRAL PENNSYLVANIA
Contact:

Lewis Propellers

Post by EDGEFLY »

While using my Chiefs' service manual, I noticed it showed a Lewis L-11-43 propeller in one Exploded view of the head end. My airplane currently has a Sensenich wooden prop which was installed about 16 years ago. the logs don't reflect any rationale for the change and insofar as I know it may be the only prop change ever made. I went to the internet and found that the Lewis firm made props for many of the typical aircraft of the same era as mine was built. They include several Aeroncas, Taylorcraft, Luscombes and other familiar aircraft.

Does anyone know of an Aeronca which is still using a Lewis prop ? It seems like an interesting chapter in Aeronca history. How did the Lewis props perform as compared to successor hardware ? Were there Lewis climb, cruise and whatever models ?

Dale
Paul Agaliotis
Posts: 2589
Joined: Wed Dec 08, 2004 18:49
Location: San Martin, California
Contact:

Re: Lewis Propellers

Post by Paul Agaliotis »

Dale,
The Lewis props work pretty well on planes with a little less drag, Luscombe, C-120 etc. Their performance is comparable with the metal props on these planes. I don't know of any Chiefs with a Lewis on, but it should perform as well as any other wood prop. I had a Fahlin on my KCA and it worked perfect, I built a copy of it for the Johnny Jones Chief.
Paul
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046
Post Reply