National Aeronca Association Bulletin Board

I've used the lenox bi-metal hole saws in material up to .120" and they cut beautifully. A light deburr and polish and away you go. Pretty cheap at around $20
Also an old instrument bezel comes in handy for a drill jig if you have some BER instruments around.

Bringing this back from the dead for those that are wondering.
The an76 bolts have been superceeded by an MS number.

The replacement for the AN76-16 is now an MS20073-06-16

Hope this helps

Ok that's what I was hoping for. Thanks for the reply. Now to try and work out a deal which could be the hard part...

I may have asked for too much info too fast.
Biggest priority is finding out if the plane will fit in the shop. I have 20 feet to work with, so knowing the fuselage length would be a benefit

Thank you.
Does anybody have the drawings or parts list for what is required/possible to install for equipment?

Thank you.
Does anybody have the drawings or parts list for what is required/possible to install for equipment?

hi all! im new on here, but ive been lurking for almost 10 years. used to work on a couple champs and occasionally fly one. I may have the opportunity to pick up a champ project and was wondering what the length of the fuselage is with the engine and tail feathers removed. need to make sure it'll fi...

AN470 universal rivets replaced those years ago as standard. no issues there