Dust Cap

[Ron Babos]

bernie: The machinist at the shop is already stressed out from other projects for me. I need to leave him alone until he has to do my oleo bushings.
Ron

[Paul Agaliotis]

Ron,
I found a spare dust cap. If you still need one let me know.
When I install the caps I use two cotter pins and bend the ends to the inside of the axel.
Paul

[Ron Babos]

Paul: Still would like to repace my groovy one. Pm me for price and other details.
Ron

[Brian]

Need one dust cap, for a 4028 Cleveland wheel. The one that covers the bearing with the three screws. It has a center screw for the larger hub cap attachment.
It appears someone did not bend the cotter key correctly and the inside of mine got gouged up badly.
Ron

I am currently out of town until the weekend. I know I have some of these dust caps in my hangar. I will check when I get home.

[Ron Babos]

Brian: Would be great if you have one.
Ron

[Ron Babos]

Still looking for a good 158-01000 cleveland dust cap, as mine is badly grooved from the cotter pin. Almost cut in half.
Used on wheel numbers 4028-3050-3040. The MDB wheel dust caps do not fit and have sent both Pauls and Brians back to them.
As a last resort I will weld the groove up, but would rather replace it with a good one if possible.
Ron

[JoeN]

Check with KRN Aviation, 480-961-8946. They say that they have
4 in stock. Have bought from them before and their prices seem fare
for the things I bought. They are listed as new surplus.